7-foot, 12-gauge extension cord for charging

Complete drum loaded with TSR-5.5 star wheel/solid carbide. Designed for removal of thin and hard materials. Applications include removal of paint, coatings, adhesive removal, plastic coatings, and dirt; light concrete preparation. These star wheel cutters leave a "shotblasted-like" profile.

Improve machine performance, reach low spots, and level high spots by following surface undulation

1-foot optional pull bar

Works with 8274-4. Allows two machines to operate from one vacuum if CFM rating is high enough.

Three assemblies and three 73250 tooling holder mounting screens are required

Dust collection hose 5" x 50" (3482)

TMO-7.15 (set)

Designed for aggressive concrete stock removal as well as coatings, glues, mastics, and other floor covering adhesives. PCDs and carbides can be used with all National planetary grinder machines. Use to attach the above tooling to National's grinders

For fast cleanup, debris collection, and removal, this box is made of high-abrasion alloy for long-lasting durability. For use with 7050-27. Size: 5 inches deep, 27 inches wide, 6 inches tall. Cutting head sold separately.

Replacement wheel pin for the 6280 and 6280HD

Morflex coupler

Replacement puller rope (3/8-inch diameter x 50 feet)

Optional attachment keeps your blade in contact with the surface of the floor. Designed to fit on the 550, 5280 and 5280 walk-behind machines.

For job sites where carbon monoxide could be present, this badge can detect as little as 100 ppm carbon monoxide gas at approximate relative humidity range of 33 to 50 percent.  If the huidity is very high, it can detect concentrations as low as 20 ppm.  The presence of CO changes the sensor from red to gray/black as the concentration levels increase.  Once the detector is exposed to fresh air, it will return back to red.  Once opened, the badge lasts approximately ninety days.  Adhesion strip on the back, or optional lapel clip mounts almost anywhere.

Fits all current National-brand ride-on machines.

Quick and easy to attach, this assembly creates stability and safe transportation over any surface. Fits all National-brand ride-on machines.

Complete drum loaded with HMR-5.40 Carbide 5-pin cutter. Designd for thin and hard material removal. Applications include roughening, abrading, leveling, grooving, bulk concrete removal, high spot removal, curled joints, thick coating and overlayment removal.

TMO-7.15 set

Replacement gripper strip (5 strips required per base)

Replacement retaining pin secures cutting head assemblies and all ride on shanks.

TSR-5.5 set

Complete drum loaded with TMO-7.15 solid carbide milling cutter. Designed for the removal of thick and soft thermoplastics, line stripes, and traffic markings on concrete and asphalt.

Designed for aggressive concrete stock removal as well as coatings, glues, mastics, and other floor covering adhesives. PCDs and carbides can be used with all National planetary grinder machines. Use to attach tooling to the above holder

7/32" T-HANDLE WRENCH

15" x 6'9"

TSR-7.5 (set)

Exclusively designed to work with the 5200QL. This high-performance battery charger is for use in demanding applications where optimal performance and service life are critical. It provides a complete charge in a short amount of time and works specifically with the 5204 power pack. Its 48-volt charger runs on 115-volt power.

Desgined to attach to National's Spartan 220 scarifier. This compact, unique side attachment allows complete preparation of edges. The Spartan E is also equipped with a vacuum port for virtually dust-free operation. 

Adjust the height of the slide plate using the hydraulic hand control for precise angling. Comes standard on the 7700 and 8000 ride-on scrapers. No lifting, dismounting, or manual labor required to adjust plate height. Adds 200 pounds of weight to the front of the machine, where it is most effective. Available as an option on new ride-on machines or as a kit for existing ride-on machines.

10-inch cutting head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

TSR-5.5 and TSR 7.5 (set)

HEPA filter for DL3000

Includes 3 satellites, 1 dust skirt, washers, and all screws/washers needed for installation.

Designed for removing hard goods with your ride-on scraper, this shank features removable and sharpenable carbide tips. For maximum effi ciency, the operator can exchange tips and sharpen them later.

This 12/3, 50-foot all-weather cord works with up to 125 volts, 15 amps, and 1,875 watts. UL-listed and meets OSHA-approved requirements.

Exclusively designed to work with the 5200QL. This high-performance battery charger is for use in demanding applications where optimal performance and service life are critical. It provides a complete charge in a short amount of time and works specifically with the 5204 power pack. Its 48-volt charger runs on 115-volt power.

Protective cover slips easily on and off wheels. Sold individually. Fits all National-brand ride-on machines

Quick change tooling plate

Drum and shaft for HMT and TMO

HEPA filter

2.5-inch to 3-inch connector

Adjust the height of the slide plate using the hydraulic hand control for precise angling. Comes standard on the 7700 and 8000 ride-on scrapers. No lifting, dismounting, or manual labor required to adjust plate height. Adds 200 pounds of weight to the front of the machine, where it is most effective. Available as an option on new ride-on machines or as a kit for existing ride-on machines. 

HMR-5.40 (set)

Rear seal

Designed for high vibration and shock load, this battery pack makes the 5200QL a true "cordless" machine.  The removable batteries can be changed so there is no need for downtime while recharging. Unique design eliminates acid spilling. Designed for high vibration. Can be charged from 115 volt. This battery pack runs to a deeper discharge than typical 75-amp hour battery packs and has the ability to take a rapid charge without affecting the cycle life.

50-foot, 10-gauge cord. 230-volt, 30-amp single phase.

The deluxe Helix Grind and Scrape Plate is the most versatile prepping plate in the industry. This magnetic tooling system converts from agressive grinding and scraping to passive planetary for diamond grinding, carbide/PCD, polishing, and sanding. The Morflex couplers allow the plate to follow the contour of the floor. 

Sold in a 4-pack

Replacement filter (3482)

Reaches under tight areas, 17-inch length, cutting head sold separately

Switch for DL1000 & DL2000

Switch for DL3000

Replacement filter

HMR-5.40 (set)

Unlike other mineral hardness testing tools, the 8270 is made of metals and alloys of hardness values equal to 2 through 9 on the Mohs hardness scale, so they can be easily ground to sharp points that will not break off. Set includes 8 points, streak plate for testing color, hardness plates (3.5 and 5.5), magnet for detecting magnetic rock, grindstone to keep points sharp, hardness tables, and instructions, all in a compact wooden case.

9 degree angle attachment.

Optional swivel head attachment maintains 100 percent contact between the blade and the surface, maximizing production rates. Rotate the head 180 degrees to self-sharpen the blade during use. Holds blades of .062 or .094 thickness. Works on thin, soft coatings, paint, hard-to-remove gummy or dry adhesives. Ultimate adhesive removal. Designed to fit on the 550, 5280, and 6280-COM walk behinds machines. 

This wood scoring drum attaches to Nationa's Spartan 220 scarifier. It is an 8" drum, with three scoring blades. Using this on your scarifier eliminates the need to get down on your hands and knees to use a circular saw to score the wood. 

22-degree angle attachment for soft goods removal with the 6280HD

Splitter for DL3000

50-foot, 10-gauge cord, 230-volt, 30-amp single phase.

Washable with soapy water; when they are dry, they can be reused. Excellent for moisture remediation and accidental water intake. For the DL2000.

Ships with the 5625 and 8000 machines. For jobsites where carbon monoxide could be present, this badge can detect as little as 100 ppm carbon monoxide gas at approximate relative humidity range of 33 to 50 percent. If the humidity is very high, it can detect concentrations as low as 20 ppm.  The presence of CO changes the sensor from red to gray/black as the concentration levels increase. Once the detector is exposed to fresh air, it will return back to red. Once opened, the badge lasts approcimately 90 days . Adhesion strip on the back, or optional lapel clip mounts almost anywhere. 

This wood scoring drum attaches to National's Spartan 220 scarifier. It is an 8" drum, with three or five scoring blades. Using this on your scarifier eliminates the need to get down on your hands and knees to use a circular saw to score the wood.

Woodruff key

Longopac bagging system

Washable with soapy water; when it is dry, it can be reused. Excellent for moisture remediation and accidental water intake. For the DL3000.

Washable with soapy water; when it is dry, it can be reused. Excellent for moisture remediation and accidental water intake. For the DL1000 and DL20000

Splitter for DL2000. Allows two machines to operate from one vacuum if CFM rating is high enough.

Monitors the hours of usage. Fits all National-brand ride-on machines.

Replacement assembly for 6280HD shanks

30-degree angle attachment for hard goods removal with the 6280HD

Designed for aggressive concrete stock removal as well as coatings, glues, mastics, and other floor covering adhesives. PCDs and carbides can be used with all National planetary grinder machines.

Designed to remove ceramic, wood, and thick epoxy.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This Japanese-style steel blade is the ideal choice for challenging jobs.

This heavy-duty blade is designed to remove soft goods, carpet and vinyl flooring. Its .062 thickness offers flexibility to maximize the shear-point angle. 

Designed for VCT and adhesive re-scrape. They also work well for parking deck coatings, epoxies, and elastomeric coatings.This blade requires a razor blade cutting head.

This Japanese-style steel blade is the ideal choice for challenging jobs.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

Designed for superhard thin epoxies, thin mil coatings (like urethane paint), poured elastomeric coatings up to 60 mil, and hard to remove adhesives. Sold in packs of 50,. This blade requires a razor blade cutting head.

This slotted heavy-duty blade is designed to remove soft goods, carpet and vinyl flooring.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

8-inch cutting head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This works on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings.

Designed for superhard thin epoxies, thin mil coatings (like urethane paint), poured elastomeric coatings up to 60 mil, and hard to remove adhesives. Sold in packs of 50,. This blade requires a razor blade cutting head.

This Japanese-style steel blade is the ideal choice for challenging jobs. 

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

12-inch cutting head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

It works on all glued-down carpets, VCT, VAT, rubber tile, cork, and re-scraping adhesive and elastomeric coatings.

This works on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

Designed to remove ceramic, wood, and thick epoxy.

This Japanese-style steel blade is the ideal choice for challenging jobs.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

It works on all glued-down carpets, VCT, VAT, rubber tile, cork, and re-scraping adhesive and elastomeric coatings.

This Japanese-style blade is the ideal choice for challenging jobs.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

Razor blade head for 6280HD-COM

14-inch cutting head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

This slotted heavy-duty blade is designed to remove soft goods, carpet and vinyl flooring.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

This Japanese-style steel blade is the ideal choice for challenging jobs.

This works on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings.

Designed for superhard thin epoxies, thin mil coatings (like urethane paint), poured elastomeric coatings up to 60 mil, and hard to remove adhesives. Sold in packs of 50,. This blade requires a razor blade cutting head.

Designed for VCT and adhesive re-scrape. They also work well for parking deck coatings, epoxies, and elastomeric coatings.This blade requires a razor blade cutting head.

It works on all glued-down carpets, VCT, VAT, rubber tile, cork, and re-scraping adhesive and elastomeric coatings.

This Japanese-style steel blade is the ideal choice for challenging jobs.

This heavy-duty blade is designed to remove soft goods, carpet and vinyl flooring. Its .062 thickness offers flexibility to maximize the shear-point angle. 

This heavy-duty blade is designed to remove soft goods, carpet and vinyl flooring. Its .062 thickness offers flexibility to maximize the shear-point angle. 

This works on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings.

Designed for superhard thin epoxies, thin mil coatings (like urethane paint), poured elastomeric coatings up to 60 mil, and hard to remove adhesives. Sold in packs of 50,. This blade requires a razor blade cutting head.

This Japanese-style steel blade is the ideal choice for challenging jobs.

Designed for VCT and adhesive re-scrape. They also work well for parking deck coatings, epoxies, and elastomeric coatings.This blade requires a razor blade cutting head.

This Japanese-style steel blade is the ideal choice for challenging jobs.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

It works on all glued-down carpets, VCT, VAT, rubber tile, cork, and re-scraping adhesive and elastomeric coatings.

12-inch razor blade head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This Japanese-style steel blade is the ideal choice for challenging jobs.

27-inch cutting head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

This works on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings.

It works on all glued-down carpets, VCT, VAT, rubber tile, cork, and re-scraping adhesive and elastomeric coatings.

This blade is mainly used for VCT, but it can be used on most other applications.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

This Japanese-style steel blade is the ideal choice for challenging jobs.

This Japanese-style steel blade is the ideal choice for challenging jobs.

14-inch razor blade head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

This works on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings.

Large frame, flat-fold side shields, clear lens, and ANSI certified.

This works on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings.

This Japanese-style steel blade is the ideal choice for challenging jobs.

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

It works on all glued-down carpets, VCT, VAT, rubber tile, cork, and re-scraping adhesive and elastomeric coatings.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

This blade is mainly used for VCT, but it can be used on most other applications.

This heavy-duty blade is designed to remove soft goods, carpet and vinyl flooring. Its .062 thickness offers flexibility to maximize the shear-point angle. 

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

6-inch cutting head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

14-inch cutting head for the 6280HD Gladiator.

Designed for VCT and adhesive re-scrape. They also work well for parking deck coatings, epoxies, and elastomeric coatings.This blade requires a razor blade cutting head.

12-inch cutting head for the 6280HD Gladiator.

10-inch cutting head for the 6280HD Gladiator.

8-inch razor blade head. Tough swivel heads rotate to ensure continuous blade contact with the floor. Flip it over to use the second sharp edge without having to remove it from the machine. 

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

This works on VCT, VAT, wood, tile, lighter ceramic, re-scraping thin-set, all carpets, cork, elastomeric coatings, and re-scraping rubber and urethane coatings.

This heavy-duty blade works on VCT, VAT, wood, tile, rubber, epoxy, elastomeric coatings, scraping thin-set, and glued ceramic.

6-inch cutting head for the 6280HD Gladiator

This angled self-scoring work on attached cushion, unitary or secondary backing, vinyl back, soft to medium PVC, linoleum, carpet tiles, soft cork, enhancer, and unibond hot melts.

Right-/left-side brush

Left-side brush

Front brush

Right-side brush

Left-side brush

Right-side brush

Left-side brush

Right-side brush

Side brush.

Front/rear brush

18 Seg, 7/8 & 5/8 hole, 13,300 RPM, Use With 3435, Concrete cleaning and planing, removing thin mil sealer. Industry-leading cup wheels come in various configurations and are ideal for coating removal, grinding high spots, and cleaning along walls. PCD wheels stay sharper longer under adverse conditions.

24 Seg, 7/8 & 5/8 hole, 8500 RPM, Use With 3420, 3425, Best for paint grinding and removal of gummy adhesive, elastomeric, epoxy, and thin set. Industry-leading cup wheels come in various configurations and are ideal for coating removal, grinding high spots, and cleaning along walls. PCD wheels stay sharper longer under adverse conditions.

Spanner wrench for knockout cup wheels

12 Seg, 5/8-11 Thread, 8500 RPM, Use With 3420, Remove epoxies, mastics, paints, and coatings. Industry-leading cup wheels come in various configurations and are ideal for coating removal, grinding high spots, and cleaning along walls. PCD wheels stay sharper longer under adverse conditions.

Spanner wrench for knockout cup wheels.

24 Seg, 7/8 & 5/8 hole, 8500 RPM, Use With 3420, 3425, Concrete cleaning and planing, removing thin mil sealer. Industry-leading cup wheels come in various configurations and are ideal for coating removal, grinding high spots, and cleaning along walls. PCD wheels stay sharper longer under adverse conditions.

9 Seg, 7/8 & 5/8 hole, 13,300 RPM, Use With 3435, Removes epoxies, mastics, paints, and coatings. Industry-leading cup wheels come in various configurations and are ideal for coating removal, grinding high spots, and cleaning along walls. PCD wheels stay sharper longer under adverse conditions.

Spanner wrench for threaded cup wheels

50 Grit: Prep concrete for reapplication and polishing. Used primarily in light industrial and residential applications for concrete grinding and profiling as well as sealer and top coat removal. Provide excellent surface profiles for new coatings, epoxies, or stains. Also create exceptional profiles for concrete preparation and restoration prior to polishing concrete. Brazed trapezoids can be used with all National planetary grinders.

70 Grit, 2 Seg, Medium Bond, Right Hand

50-grit corner brazed

30 Grit, 10 Seg

30 Grit: Remove sealers and preps concrete for polishing. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

50 Grit: Create a "broom finish" on soft concrete surfaces; first stage to polishing concrete. Used primarily in industrial applications for medium to aggressive concrete grinding and profiling as well as sealer and top coat removal. Perfect for concrete preparation and restoration prior to concrete polishing. In addition, brazed diamonds effortlessly remove stains and imperfections from exterior wood decking while simultaneously profiling wood for receiving new stains and/or sealers. These polishing pads are for use with all National planetary grinders.

30 Grit: Remove various coatings, and profiles on HARD concrete only. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

40 Grit, 2 Seg, Soft Bond, Right Hand

100-grit corner brazed

100 Grit: Create a "broom finish" on soft concrete surfaces; first stage to polishing concrete. Used primarily in industrial applications for medium to aggressive concrete grinding and profiling as well as sealer and top coat removal. Perfect for concrete preparation and restoration prior to concrete polishing. In addition, brazed diamonds effortlessly remove stains and imperfections from exterior wood decking while simultaneously profiling wood for receiving new stains and/or sealers. These polishing pads are for use with all National planetary grinders.

Metal Bond Diamond - Hard

Metal Bond Diamond - Medium

16 Grit: Remove paint, stain, and sealers; preps concrete for reapplication. Used primarily in light industrial and residential applications for concrete grinding and profiling as well as sealer and top coat removal. Provide excellent surface profiles for new coatings, epoxies, or stains. Also create exceptional profiles for concrete preparation and restoration prior to polishing concrete. Brazed trapezoids can be used with all National planetary grinders.

25 Grit, 4 Seg, Hard Bond

30 Grit: Remove various coatings, and profiles on SOFT concrete only. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

70 Grit, 2 Seg, Hard Bond, Left Hand

Metal Bond Diamond - Hard

40 Grit, 4 Seg, Hard Bond

Metal Bond Diamond - Soft

30 Grit: Prep concrete for reapplication and polishing. Used primarily in light industrial and residential applications for concrete grinding and profiling as well as sealer and top coat removal. Provide excellent surface profiles for new coatings, epoxies, or stains. Also create exceptional profiles for concrete preparation and restoration prior to polishing concrete. Brazed trapezoids can be used with all National planetary grinders.

40 Grit, 2 Seg, Medium Bond, Left Hand

40 Grit, 4 Seg, Medium Bond

3 Grit: Remove thin epoxy, paint, adhesives and sealers. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

Metal Bond Diamond - Hard

Metal Bond Diamond - Medium

30 Grit: Prep high-/moderate-density concrete for reapplication. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

20 Grit, 2 Seg, Medium Bond, Left Hand

70 Grit, 2 Seg, Hard Bond, Right Hand

16 Grit: Remove epoxy as well as heavy and light sealers. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

16 Grit, 10 Seg

80 Grit, 4 Seg, Soft Bond

40 Grit, 2 Seg, Medium Bond, Right Hand

80 Grit, 4 Seg, Medium Bond

100 Grit: Prep concrete for polishing. Used primarily in light industrial and residential applications for concrete grinding and profiling as well as sealer and top coat removal. Provide excellent surface profiles for new coatings, epoxies, or stains. Also create exceptional profiles for concrete preparation and restoration prior to polishing concrete. Brazed trapezoids can be used with all National planetary grinders.

16 Grit: Remove various coatings, and profiles on HARD concrete only. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

20 Grit, 2 Seg, Medium Bond, Right Hand

70 Grit, 2 Seg, Soft Bond, Left Hand

50 Grit: Prep concrete for polishing. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

25 Grit, 4 Seg, Soft Bond

12 Grit: Remove thin epoxy, paint, adhesives and sealers. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

30 Grit: Remove light sealers. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

20 Grit, 2 Seg, Hard Bond, Left Hand

16 Grit: Remove thin epoxy, paint, stain, adhesives, and heavy sealers. Used primarily in industrial applications for medium to aggressive concrete grinding and profiling as well as sealer and top coat removal. Perfect for concrete preparation and restoration prior to concrete polishing. In addition, brazed diamonds effortlessly remove stains and imperfections from exterior wood decking while simultaneously profiling wood for receiving new stains and/or sealers. These polishing pads are for use with all National planetary grinders.

40 Grit, 4 Seg, Soft Bond

16 Grit: Remove thin epoxy, paint, adhesives and sealers. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

70 Grit, 2 Seg, Soft Bond, Right Hand

80 Grit, 4 Seg, Hard Bond

30 Grit: Remove adhesives, heavy and light sealers. Used primarily in industrial applications for medium to aggressive concrete grinding and profiling as well as sealer and top coat removal. Perfect for concrete preparation and restoration prior to concrete polishing. In addition, brazed diamonds effortlessly remove stains and imperfections from exterior wood decking while simultaneously profiling wood for receiving new stains and/or sealers. These polishing pads are for use with all National planetary grinders.

120 Grit: Prep concrete for polishing. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

20 Grit, 2 Seg, Hard Bond, Right Hand

30-grit corner brazed

70 Grit, 2 Seg, Medium Bond, Left Hand

40 Grit, 2 Seg, Soft Bond, Left Hand

25 Grit: Extremely aggressive coating removal with supersoft matrix for hard concrete or heavy cure and seal treatments, perfect for breaking surface tension. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

40 Grit, 2 Seg, Hard Bond, Right Hand

40 Grit, 2 Seg, Hard Bond, Left Hand

Metal Bond Diamond - Soft

Metal Bond Diamond - Medium

Metal Bond Diamond - Hard

Metal Bond Diamond - Medium

Metal Bond Diamond - Soft

20 Grit, 2 Seg, Soft Bond, Left Hand

20 Grit, 2 Seg, Soft Bond, Right Hand

Metal Bond Diamond - Soft

25 Grit, 4 Seg, Medium Bond

25/30 Grit, 2 Seg

16 Grit: Remove various coatings, and profiles on SOFT concrete only. Used for light, medium, and aggressive concrete grinding and profiling as well as sealer and top coat removal. Can be used for both residential and industrial applications. Perfect for leveling concrete high spots and repairing imperfections as well as creating the perfect profile for accepting new coatings and epoxies, or preparing concrete for polishing. Metal bond diamonds can be used with all National planetary and passive planetary grinders.

Top liner

Right-side liner

Top liner

Left-side liner

Right-side liner

Top liner

Left-side liner

Right-side liner

Top liner

Right-/left-side liner

Left-side liner

Top liner

Right-side liner

Left-side liner

This push-type sweeper is made with a powerful ceramic magnet and durable aluminum frame and handle. It features a 14-inch sweeping width, 6-inch wheels, and a quick-release handle to make picking up nails, screws, and other metal debris easy. 

This push-type sweeper is made with a powerful ceramic magnet and durable aluminum frame and handle. It features a 24-inch sweeping width, 6-inch wheels, and a quick release handle to make picking up shot, nails, screws and other metal debris easy.

Handheld magnet is designed for loading and unloading media into shot blast machines.

This sweeper is ideal for steel shot, and it picks up metal debris quickly and easily. Includes release handle, height-adjustable settings of 1, 2, and 3 inches, wheeled construction makes it easy to push across surfaces, and 24-inch magnet, 25-inch width.

Designed for aggressive concrete stock removal as well as coatings, glues, mastics, and other floor covering adhesives. PCDs and carbides can be used with all National planetary grinder machines. Remove heavy stock, adhesive, thin set, and epoxies

Designed for aggressive concrete stock removal as well as coatings, glues, mastics, and other floor covering adhesives. PCDs and carbides can be used with all National planetary grinder machines. Removes heavy stock, adhesive,thin set, and epoxies

Designed for aggressive concrete stock removal as well as coatings, glues, mastics, and other floor covering adhesives. PCDs and carbides can be used with all National planetary grinder machines. Removes heavy stock, adhesive, thin set, and epoxies

Designed for aggressive concrete stock removal as well as coatings, glues, mastics, and other floor covering adhesives. PCDs and carbides can be used with all National planetary grinder machines. Removes coatings, glues, thin set, and thin mastics

20 Grit, PCD

Right Hand PCD, Rough Profile

Left Hand PCD, Rough Profile

Designed for aggressive concrete stock removal as well as coatings, glues, mastics, and other floor covering adhesives. PCDs and carbides can be used with all National planetary grinder machines. Remove heavy stock, adhesive, thin set, and epoxies

3000 Grit: Follow 9267-1500 to create a "mirror" polished concrete. Used for polishing concrete to various finishes and shines. Resin bond. Available in escalating grits. These polishing pads are for use with all National planetary grinders.

200-grit corner resin

800 Grit: Follow 9267-400 to create a "shine" polished concrete. Used for polishing concrete to various finishes and shines. Resin bond. Available in escalating grits. These polishing pads are for use with all National planetary grinders.

50-grit corner resin

Mounts onto the 9241 quick-change magnetic assembly for using polishihng pads and brazed disks. Three adapters are required. 

50 Grit: Achieve a "no reflection" polished concrete. Used for polishing concrete to various finishes and shines. Resin bond. Available in escalating grits. These polishing pads are for use with all National planetary grinders.

1500 Grit: Follow 9267-800 to create a "high shine" polished concrete. Used for polishing concrete to various finishes and shines. Resin bond. Available in escalating grits. These polishing pads are for use with all National planetary grinders.

100-grit corner resin

400-grit corner resin

800-grit corner resin

1500-grit corner resin

100 Grit: Follow 9267-50 to create a "little reflection" polished concrete. Used for polishing concrete to various finishes and shines. Resin bond. Available in escalating grits. These polishing pads are for use with all National planetary grinders.

1800-3000 Grit

800-1500 Grit

3000-grit corner resin

200 Grit: Follow 9267-100 to create a "moderate reflection" polished concrete. Used for polishing concrete to various finishes and shines. Resin bond. Available in escalating grits. These polishing pads are for use with all National planetary grinders.

400 Grit: Follow 9267-200 to create a "satin reflection" polished concrete. Used for polishing concrete to various finishes and shines. Resin bond. Available in escalating grits. These polishing pads are for use with all National planetary grinders.

400-800 Grit

100-200 Grit, Semi Metal Transition Pad

200-400 Grit

2" Blast Width

4" Blast Width

2" Blast Width

4" Blast Width

6" Blast Width

6" Blast Width

This shank is designed for ceramic removal and thin-set re-scraping. The 552 angle shank with carbide tip is deisgned for light-duty commercial- and residential-grade ceramic tile and hard good removal. A 551 shank holder is required to attach the 552 shank to the 550 walk-behind scraper.

Designed to remove ceramic, wood, and thick epoxy.

For hardwood floor removal; fits the 6280HD Gladiator only. 

This shank is designed for ceramic removal and thin-set re-scraping. The 552 angle shank with carbide tip is deisgned for light-duty commercial- and residential-grade ceramic tile and hard good removal.

Designed to remove ceramic, wood, and thick epoxy.

The longer taper works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. 

This shank is designed for ceramic removal and thin-set re-scraping. The 552 angle shank with carbide tip is deisgned for light-duty commercial- and residential-grade ceramic tile and hard good removal.

This shank works with a similar application variety as the 7070 blades. Perfect for elastomeric coatings.

Designed for removing hard goods with your ride-on scraper, this shank features removable and sharpenable carbide tips. For maximum efficiency, the operator can exchange tips and sharpen them later.

The longer taper works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. 

This shank is designed for ceramic removal and thin-set re-scraping. The 552 angle shank with carbide tip is deisgned for light-duty commercial- and residential-grade ceramic tile and hard good removal.

This shank works with a similar application variety as the 7070 blades. This blade performs when all others fail. Perfect for elastomeric coatings.

This shank is designed for ceramic removal and thin-set re-scraping. The half inch of extra carbide allows for maximum re-sharpening. These tools can handle workloads up to 3,500 pounds.

This shank is designed for ceramic removal and thin-set re-scraping. The half inch of extra carbide allows for maximum re-sharpening. These tools can handle workloads up to 3,500 pounds.

Designed for removing hard goods with your ride-on scraper, this shank features removable and sharpenable carbide tips. For maximum efficiency, the operator can exchange tips and sharpen them later.

The longer taper works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. 

Designed to remove ceramic, wood, and thick epoxy.

This shank is designed for ceramic removal and thin-set re-scraping. The 552 angle shank with carbide tip is deisgned for light-duty commercial- and residential-grade ceramic tile and hard good removal.

This shank works with a similar application variety as the 7070 blades. Perfect for elastomeric coatings.

Designed to remove ceramic, wood, and thick epoxy.

Designed to remove ceramic, wood, and thick epoxy.

The longer taper works great on tough wood floors (glued and nailed). The long length allows the blade to easily slide under tough materials. 

This shank is designed for ceramic removal and thin-set re-scraping. The 552 angle shank with carbide tip is deisgned for light-duty commercial- and residential-grade ceramic tile and hard good removal.

This shank works with a similar application variety as the 7070 blades. Perfect for elastomeric coatings.

Designed to remove ceramic, wood, and thick epoxy.

This shank is designed for ceramic removal and thin-set re-scraping. The 552 angle shank with carbide tip is deisgned for light-duty commercial- and residential-grade ceramic tile and hard good removal.

S-280, 50-pound bag

S-330, 50-pound bag

Includes: Toolbox 20" x 9" x 9", Open wrench 10, Open wrench 13, Universal Socket, Slotted screwdriver 6", Hammer, Hex key wrench 6mm, Safety Glasses, Blast wheel kit 165 mm, Top liner, RH liner, LH Liner, Abrasive control cable, 2 x Brush side LH & RH, 2 x Brush, front & rear, Wrench (open 17mm), Ratchet (1/2"), Wrench (open 11mm).

Belt

Belt

Includes: Toolbox 410 x 240 x 250, Jaw wrench 10 x 11, Jaw wrench 13 x 17, Jaw wrench 17 x 19, Wrench insert 10 mm, Wrench insert 13 mm, Wrench insert 17 mm, Wrench insert 19 mm, Wrench insert, Change-over ratched 1/2", Slotted screwdriver, Hammer 500, Hex key, Safety Glasses, Blast wheel kit 165 mm, Top liner, RH liner, LH liner, Side brush LH, Brush in the front and rear skid seal, Side brush RH, Abrasive control cable, Rear seal, V-ribbed belt

Includes: Toolbox 660 x 280 x 320, Jaw wrench 10 x 11, Jaw wrench 13 x 17, Jaw wrench 17 x 19, Wrench insert 10 mm, Wrench insert 13 mm, Wrench insert 17 mm, Wrench insert 19 mm, Wrench insert, Change-over ratch 1/2", Slotted screwdriver, Hammer 500, Hex key wrench, Safety Glasses, Blast wheel kit 165 mm, Abrasive control cable, Top liner, Side liner RH, Side liner LH, Side brush LH, V-ribbed belt, Side brush RH, Brush front long, Brush front short, Rear seal

Includes: Toolbox 660 x 280 x 320, Jaw wrench 10 x 11, Jaw wrench 13 x 17, Jaw wrench 17 x 19, Jaw wrench 22 x 24, Wrench insert 10 mm, Wrench insert 13 mm, Wrench insert 17 mm, Wrench insert 19 mm, Wrench insert 8 x 100 mm, Wrench insert 24 mm, Change-over ratchet, Slotted screwdriver 5.5 x 1.0 x 100, Hammer 500 Gr., Hex key wrench 6mm, Safety glasses, Tune-up kit 200 mm, Top liner, Side Liner, Abrasive control cable, Tooth belt, Brush gasket LH, Brush gasket RH, Brush gasket front, Seal gasket

165 mm wheel kit

Wheel kit

200 mm wheel kit